What Is A Dash Camera And How It Works | Why To Use | Lost Footage

Nowadays, in the cities, busy roads lead to many accidents. Especially when there is an existence of such technology i.e mobile phones, earphones, etc. People usually are indulged in these activities while driving, which is a risky task which leads to accidents.

For this to be avoided a truthful record of accidents is required, which will save us from the after arguments of accidents from courthouses. We believe in a product that can secure and enhance your driving experience with a great camera device built for high performance.

What Is A Dash Camera?

A dash camera is a small, windscreen that is mounted in a car and records everything in front and in some instances the rear of a driver. It can be a motorist’s independent witness when an accident takes place. It also saves money on their insurance along with acting as a proof.

Most dash cameras also have the feature of parking mode, which can record incidents and act as a deterrent against damage and theft.

Why Is A Dash Camera Necessary?

So, if you are new to the idea of dashcams you’re wondering what’s the point in one whether it’s worth installing it in your car and how hard they are to operate. I think this is a good place to have a quick knowledge about how and why dash cams are operated.

Also Read:  7 Best GoPro for Motorcycle.

The video footage will show how many people were in the vehicle that you collided with and that’s very important because your typical insurance fraudster will always claim his vehicle was full of passengers all of whom have terrible whiplash when you know in reality there are only perhaps one or two people present at the scene. But even when it comes to normal more typical car crashes, bumps and scrapes; video evidence can prove who was at fault which saves us from arguing with the person or with the lawyer in the court.

How Does A Dash Camera Works?

A dashcam is mounted onto the windscreen and records the road when you are driving. It’s powered via the cigarette lighter cable or can be hardwired into the fuse box. The dashcam starts recording automatically when the ignition key is turned. It records on a continuous loop, with each clip filmed on a short 3-minute segment onto a micro SD card. Dash cameras also record at night, but as levels get low, WDR and HDR helps us to see a clear image at night also.

If you do a lot of driving, then we would recommend you to use dash cameras as it has many benefits like; protection when the car is being parked, helps in tackling bad drivers and crime, helps in resolving disputes from incidents quicker and also encourages us to drive better and better every day.

Why The Footage In A Dash Camera Gets Lost?

Even after the videos being protected in the dash cameras, the deletion or corruption of videos is very common. Following are the reasons for your lost videos from dash cameras:

  • Improper handling of a dash camera, like when you try to remove the SD card while the device is recording.
  • Continue recording videos at low battery or when the storage media is running out of space.
  • SD cards have a limited lifespan and over some time, they have gone corrupted.
  • The SD card is physically damaged.
  • You connected the SD card with the system having a virus.
  • Incompatible device drivers.
  • Bad blocks on SD card due to exceeding the limit of write/erase cycles.
Also Read:  Garmin Dash Cam 55 Review

HOW TO RECOVER LOST DASH CAMERA VIDEO FOOTAGE?

Following are some methods to fix the corrupted or lost dash camera videos:

Manual Fix 1: Reinstall The Driver

To begin with, connect the SD card of your car dash cam to your computer. Reinstall the driver following the below steps:

  • Go to This PC and right-click on it. Click on Manage > Device Manager > Double-click Disk Drives.
  • Right-click on your removable drive (here that of dashcam SD card).
  • Click Uninstall > Ok.
  • Now disconnect your SD card and restart the computer.
  • Reconnect your SD card, the PC should detect the card now.

Manual Fix 2: Assign New Drive Letter

Connect the SD card of your car dash cam to your computer.

  • Press the Windows+R key to open the Run dialogue box.
  • Type msc and press enter.
  • Under Storage select Disk Management.
  • Right-click the drive you want to assign a letter, on the right side.
  • Select Change drive letter and paths.
  • Click on Change in the dialog box.
  • Check-in Assign the following drive letter.
  • Select the drive letter from the dropbox.
  • Click OK. Close Computer Management.

Manual Fix 3: Perform Chkdsk

You can apply this fix if errors like ‘SD card is damaged. Try reformatting it’ appear on connecting the dash cam memory card to the computer. To do Chkdsk follow the below steps:

  • Go to the Windows taskbar, click on Start, type cmd in the search box.
  • Right-click cmd and select Run as Administrator.
  • A command prompt appears, type chkdsk <dash cam SD card drive letter >:/f .
  • Press Enter.

The Chkdsk checks and fixes the corrupt SD card. Now again open your SD card in the system to check if the videos are restored or not. Chkdsk only fixes the minor corruption in the SD card.

Also Read:  Vantrue N2 Pro Review

Conclusion

We believe we helped you in recovering your lost dash cam footage. If you still have some doubts or are confused drop us a comment below,
Cheers!

Leave a Reply